Mitte Products
-
Rectangular spinneret plate
Model: 640X120X33X33870XΦ0.075
Used for: the production of Lyocell fiber
features: good consistency between the aperture and the hole, high surface and hole finish, small hole irregularity, good consistency of ring spacing, high compressive strength, can produce different specifications of spinneret according to customer requirements.
Parameter control: aperture tolerance ±0.002mm, hole distance < 0.02mm, surface roughness: spinneret surface Ra≤0.1, straight hole surface Ra≤0.1, pilot hole surface Ra≤0.2, the rest of the Ra≤0.4 hole roundness < 0.002mm, ring distance, spacing < 0.02mm
-
Cap-shaped spinning head
Model: Φ16X2300XΦ0.055
Used for:Viscose staple fiber wet spinning
Features: good consistency of aperture distance, high surface and channel finish, small hole irregularity, good consistency of ring spacing, can produce different specifications of spinners according to customer requirements.
Parameter control: aperture tolerance ±0.002mm, hole distance < 0.02mm, surface roughness: spinneret surface Ra≤0.1, straight hole surface Ra≤0.1, pilot hole surface Ra≤0.2, the rest of the Ra≤0.4 hole roundness < 0.002mm, ring distance, spacing < 0.02mm
-
Tapered nozzle head
Model: Φ12 cone 5X30XΦ0.0778
Used for: Viscose long fiber wet textile spinning.
Features: Good consistency of aperture distance, high surface and channel finish, small hole irregularity, good consistency of ring spacing, can produce different specifications of spinneret according to customer requirements.
Parameter control: aperture tolerance ±0.002mm, hole distance < 0.02mm, surface roughness: spinneret surface Ra≤0.1, straight hole surface Ra≤0.1, pilot hole surface Ra≤0.2, the rest of the Ra≤0.4 hole roundness < 0.002mm, ring distance, spacing < 0.02mm
-
Torus-shaped spinneret plate
Model: Φ556X85000XΦ0.085
Used for: the production of Lyocell
features: good consistency between the aperture and the hole, high surface and hole finish, small hole irregularity, good consistency of ring spacing, high compressive strength, can produce different specifications of spinneret according to customer requirements.
Parameter control: aperture tolerance ±0.002mm, hole distance < 0.02mm, surface roughness: spinneret surface Ra≤0.1, straight hole surface Ra≤0.1, pilot hole surface Ra≤0.2, the rest of the Ra≤0.4 hole roundness < 0.002mm, ring distance, spacing < 0.02mm